These are the Blackwidow eproms, a 2532 and a 2716 are neeed for the small one.
136017.101 - 136017.106 are code the other 4 are vector roms.
136017.107 is the small one.
The files are binary format.
On the board here is the placement:
Code first
D1 136017.101 4K 2532
E/F1 136017.102 "
H1 136017.103 "
J1 136017.104 "
K/L1 136017.105 "
M1 136017.106 "
Vector rom
R7 136017.110 "
N/P7 136017.109 "
M/N7 136017.108 "
L7 136017.107 2K 2716
---------------------------------------------------------------------------
Pinouts for "Black Widow" (Atari, 1983)
2/13/96 Changed `-SENSE (-5V)' to `-SENSE (GND)'
Franklin Bowen (mjrhavoc@clark.net or tfbowen@ingr.com)
P20: 44-pin edge connector
component side solder side
-------------- -----------
GND A 1 GND
+5V B 2 +5V
C 3 +22 VDC
D 4 -22 VDC
10.3 VDC E 5
COIN LOCKOUT F 6 COIN CTR R
COIN CTR L H 7 P1 LED
P2 LED J 8 FIRE UP
FIRE DOWN K 9 FIRE LEFT
FIRE RIGHT L 10
P1 START M 11 P2 START
SW GND N 12 SW GND
P 13
CABINET R 14 SLAM
AUX COIN S 15
SELF TEST T 16 COIN L
COIN R U 17
V 18
W 19
X 20
+5V Y 21 +SENSE (+5V)
GND Z 22 -SENSE (GND)
P19: 24-pin edge connectoor
component side solder side
-------------- -----------
X OUT A 1 X GND
Y OUT B 2 Y GND
C 3 MOVE RIGHT
D 4 MOVE LEFT
MOVE UP E 5 MOVE DOWN
F 6
RED GND H 7 RED
GREEN GND J 8 GREEN
BLUE GND K 9 BLUE
L 10
AUDIO GND M 11 AUDIO 2
N 12 AUDIO 1
Notes:
------
- For testing purposes, Gravitar boards can be plugged directly into
a Black Widow harness. If you want to actually play the game, you
just have to rewire the control panel, as all required pins are
already present in the harness.
---------------------------------------------------------------------------