Guzzler, Tehkan
-----------------
COMPONENT | SOLDER
-------------------------------------------
2P.Left | 1 | A | 2P.Right
2P.Down | 2 | B | 2P.Up
| 3 | C | 2P.Discharge
| 4 | D |
1P.Left | 5 | E | 1P.Right
1P.Down | 6 | F | 1P.Up
| 7 | G | 1P.Discharge
| 8 | H |
2P.Start | 9 | I | 1P.Start
Coin A |10 | J | Coin B
GND |11 | K | GND
GND |12 | L | GND
GND |13 | M | GND
Spaker |14 | N | Speaker
+12V |15 | O | +12V
|16 | P |
+5V |17 | Q | +5V
+5V |18 | R | +5V
TV 6 P Connector
----------------
1 Blue
2 Green
3 Red
4 GND
5 Sync
6 GND
Dip sw. A
---------
1 2 3 4 5 6 7 8
-----------------------------------------------
Coin A - - 1Coin/1Play
+ - 1Coin/2Play
- + 1Coin/3Play
+ + 1Coin/6Play
Coin B - - 1Coin/1Play
+ - 2Coin/1Play
- + 1Coin/2Play
+ + 1Coin/3Play
Bonus AT - - 30000, 100000
+ - 20000, 50000
- + 30000 Only
+ + No Bonus
Guzzlers - - 3
+ - 4
- + 5
+ + Free Play
Dip sw.B
-------- 1 2 3 4
-----------------------------------------------------------
Type - Table
+ Upright
Registered Letters - 10 Letters
+ 3 Letters
Difficulty - - Easy
+ - Normal
- + Hard
+ + Hardest
--------------------------------------------------------------------------
--------------------------------------------------------------------------
Note:
-----
1) Sound amplifier for Guzzler PCB is the B.T.L. Both sound output lines
can lead any point but GND.
2) Picture might get snow noise at max sound volume. In that case please
try following modification.